Depressurizing and Refilling the Brio 220CC/225CC Steam Cleaner

In order to remove the safety filling cap, the steam cleaner must first be depressurized. Please follow the instructions below to understand how to refill the steam cleaner.

Step 1: Ensure the steamer is plugged in. Switch the appliance off by pressing the power button, which is located on the front of the device as shown in figure 1.

Figure 1

Step 2: Hold the trigger, as shown in figure 2, to release built up pressure from the appliance. Continue to hold the trigger until there is no more steam coming out of the gun.
Note: This process can take a few minutes.

Figure 2

Step 3: Once there is no more steam coming out of the appliance, remove the safety filler cap located on top of the unit as shown in figure 3. Once the cap is removed, refill the unit with water. After refilling, close the safety filler cap and ensure it is tightly secured. The appliance is now ready for use.

Figure 3