Maven Iron Station Is not Steaming

• During first time use, it may take 10-30 seconds for steam to start. This may take longer if cartridge is not completely soaked.
• Your unit may make “chugging” noises upon initial use. This is normal. It is simply the water drawing into the unit. As noted above, this chugging may take 30+ seconds when first using your Maven Iron Station.
• Hold down the steam button to assist with the water drawing process. If your unit requires more water, refill your water tank. We recommend you change your descaling cartridge every 3 to 6 months.

MAVEN 125IS FILTER

How to Soak Your Filter:

1. Immerse the new anti-scale cartridge into water for 5 minutes with one hole above the water and one hole submerged according to (See mage above).
2. Make sure the filter is entirely wet through the inside before inserting into machine.

IMPORTANT:  It may take some time the first use.  Please hold the trigger until steam is produced.

ADVANCE TROUBLESHOOTING:  Still not steaming.

• Try running the filter under water. Run the water into one of the holes on the filter until you see water coming out the other side.  This will ensure the filter is properly soaked for first time use.